Download  Print this page

Power Management Function - MITSUBISHI ELECTRIC LDT462V User Manual

46" lcd display monitor.
Hide thumbs

Advertisement

U-1
Turning on all the connected devices (continued)

Power Management Function

This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a fi xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
When the power saver in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (HDMI, DVI-D,
D-SUB) is terminated, the monitor will be in the sleep
mode in several seconds.
VIDEO: When the sync signal of video input (YPbPr, S-VIDEO, or
VIDEO) is terminated, the monitor will be in the sleep
mode in approximately 10 minutes.
[Description]
DPM: Acronym for Display Power Management
NOTE:
The default power management settings (power savers) for
RGB and VIDEO are ON.
When an OPS-compliant module is in the option slot, the
monitor doesn't enter the sleep mode even when POWER
SAVE in the CONFIGURATION1 menu is set to ON. Even
when other video input is selected, the monitor doesn't
enter the sleep mode.
Power Indicator
Status
Power-on mode
Power-off mode
Power Standby when
"SCHEDULE" is enable
Sleep mode
The main power is off.
Diagnosis (Detecting failure)
LED
Green
Red
Red On
Green Blinking
Red, Green
Off
Red Blinking
* See troubleshooting on page 57.
English-29

Advertisement

Chapters

Table of Contents

   Also See for MITSUBISHI ELECTRIC LDT462V

   Related Manuals for MITSUBISHI ELECTRIC LDT462V

This manual is also suitable for:

Bl109

Comments to this Manuals

Symbols: 0
Latest comments: