[P-8] Connecting The Power Cord To The Monitor; Connecting The Power Source - Mitsubishi Electric LDT462V User Manual

P-8 Connecting the power cord to the monitor
Before making connections
• Check that the main power switch is off.
CAUTION:
When an OPS-compliant computer is installed and the main power switch of the monitor is on, connecting the power source
may cause the computer to power on, causing damage or breakdown of the operation system and the hard disc.
• The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
• Fully insert the prongs into the power outlet socket.
Loose connection may cause noise.
• Don't plug and unplug the power cord repeatedly in a short time of period.
NOTE:
Please refer to "Safety Precautions, Maintenance & Recommended Use" in this manual for proper selection of the AC power cord.
Use the clamper to prevent accidental disconnection of the power cord.
Main power switch

Connecting the power source

Power cord (For EU)
Power cord (For North America)
English-26
Clamper