Oce fx3000 Quick Setup Manual page 28

Step 2
For USB Interface Cable Users
For Mac OS
Make sure that you have finished the instructions from Step 1 "Setting Up
the machine" on pages 4 - 11.
For Mac OS
to Mac OS
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your CD-
ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and Multi-Function Suite.
If the language screen appears, choose
your language.
26
Installing the Drivers & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 user, upgrade
®
X 10.2.4 or greater.
®
, if you already connected an
®
.
5
Follow the on-screen instructions, and
restart your Macintosh
6
After the DeviceSelector window appears,
connect the USB interface cable to your
®
Macintosh and then to the machine.
The DeviceSelector window will not appear if
you have connected a USB interface cable to
the machine before restarting your
®
Macintosh or if you are overwriting a
previously installed version of the Océ
software. If you encounter this problem
continue with the installation but skip Step 9.
You should choose your Océ machine from
the Model pull-down list in the main screen of
ControlCenter2 (For details, see the Software
User's Guide on CD-ROM).
®
.