Related Manuals for Zanussi ADVANTAGE400
Summary of Contents for Zanussi ADVANTAGE400
-
Page 1: Washing Machine
WASHING MACHINE AUTOMATA MOSÓGÉP AUTOMATICKÁ PRÁČKA AUTOMATICKÉ PRAČKY INSTRUCTION BOOKLET HASZNÁLATI ÚTMUTATÓ NÁVOD NA OBSLUHU NÁVOD K OBSLUZE 35.292.617/0... -
Page 2: Table Of Contents
CONTENTS Technical specifications ............................Pág. Warnings ................................... Pág. Unpacking and installation............................Pág. Transit security bars............................. Pág. Hydraulic connection............................Pág. Levelling ................................Pág. Electrical connection ............................Pág. Descriptions of the controls............................ Pág. Control panel................................ Pág. Use of controls ................................. Pág. Washing powder dispenser..........................Pág. -
Page 3: Warnings
WARNINGS THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. YOU MUST READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE. It is most important that this instruction book should always be at hand for the user for reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. -
Page 4: Unpacking And Installation
UNPACKING AND INSTALLATION TRANSIT SECURITY BARS HYDRAULIC CONNECTION Before starting the machine up, the transport security There should be a COLD WATER tap near the washing bars must be removed as follows: machine with a screwing on connection pipe of 3/4 gas for You are advised to keep all the transport security bars in the water supply, a sink, a wash basin or a drainage system case the appliance has to be transported again. -
Page 5: Levelling
1,5 m. Maximun 1,5 m. Maximum IMPORTANT: The distance from the floor to the highest ELECTRICAL CONNECTIONS part of the hose should be between 60 to 90 cm. (It is Before plugging the appliance make sure that: advised to be between 60 and 70 cm). The hose must not be bent nor twisted to avoid clogging. -
Page 6: Descriptions Of The Controls
DESCRIPTION OF THE CONTROLS Control panel 1. WASHING POWDER DISPENSER 4. PROGRAM SELECTOR To select the required program turn the control clockwise The dispenser is until the marker on the top coincides with the number of the provided with 3 required program (reference mark on the control panel). -
Page 7: How To Use Controls Detergent And Additives
HOW TO USE THE CONTROLS DETERGENT AND ADDITIVES 1. LOADING THE WASHING MACHINE 4. SELECT THE TEMPERATURE Load the laundry loosely, alternating large items with small You can change the temperature of the programs stated ones. with 90°C pressing the «E» button, then the maximum water temperature will be 60°C. -
Page 8: Programs For Cotton And Linen
PROGRAMS FOR COTTON AND LINEN Maximum load 5 kg. DEGREE COMPARTMENTS MAXIMUM POSITION PROGRAM DESCRIPTION OF SOIL TO USE WATER TEMP. PROGRAM Prewash Wash at 90°C WHITES heavy 4 rinses with prewash soil Spin 5 min. Wash at 90°C WHITES •... -
Page 9: Washing Hints
WASHING HINTS Sort the laundry according to the type of fabric, colour LOAD THE WASHING MACHINE fastness and how dirty it is. Check the quantity you are going to wash for each cycle. When washing curtains remove the hooks. It is rather difficult to weigh all the pieces to be washed. We It is essential to wash new coloured items separately when therefore advise you: washing them for the first time. -
Page 10: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before any maintenance or cleaning is carried out you THE DANGERS OF FREEZING must DISCONNECT the appliance from the electricity If the machine is exposed to temperatures below 0ºC, supply. certain precautions should be taken. * Turn off the water tap and unscrew the inlet hose. EXTERNAL CLEANING * Select a wash program and run for a few seconds. -
Page 11: Servicing
SERVICING Before contacting your local Service Force Centre, check THE MACHINE LEAKS OR OVERFLOWS your machine against the simple maintenance guidelines * Too much washing powder. given below. * Unsuitable washing powder. * Check the joints for leaks. It is rather difficult to see the THE APPLIANCE DOES NOT START UP water running along a hose.
Need help?
Do you have a question about the ADVANTAGE400 and is the answer not in the manual?
Questions and answers