Ice Cube Trays; Defrosting - Zanussi ZF134UN Instruction Booklet

Ice cube trays

The appliance includes one or more trays for
producing ice cubes.
These trays should be filled with drinking water and
repositioned inside the compartment.
Do not use metal tools to remove the trays.

Defrosting

The frost inside the appliance must be removed
whenever it reaches a thickness of 4 mm, using the
special scraper.
If a thick layer of ice has formed, complete defrosting
will be necessary. Proceed as follows:
switch off the appliance by means of the ON/OFF
switch;
wrap frozen food in several sheets of newspaper and
put it in a very cool place;
leave the door open;
once defrosting has been completed, thoroughly dry
the inside of the freezer;
keep the scraper for future use;
move switch (D) to the ON position; turn knob (C) to
the required setting.
Set the appliance to run on fast freeze. After three
hours, return switch (A) to the normal position.
Important
Opening the door can increase the formation of
frost, especially towards the top of the appliance.
To remove it, use the special scraper provided.
24