System Log - Toshiba HDS-M5200 series User Manual

To use a mouse in Pan/Tilt mode, please move the cursor to the lower portion near the center of the screen. To use front
button in Pan/Tilt mode, please push setup button. A key pad control will show as follows:
To save current camera number, select Preset No and
To move to preset, select preset No and
Available 1 ~ 255 Preset numbers can saved it depends on camera specification.
As explained earlier in 4.4.2. press Menu button to pop-up PTZ camera OSD setup screen and set up Tour and Pattern
items.
Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD.
Once user completes the setup, close the Camera OSD menu.
User can conveniently use Tour and Pattern functions simply by clicking Tour and Pattern buttons.
Particulars on how to setup each function on OSD Menu are found in the manual of a corresponding camera.
(NOTE)
Suppose a command for using Tour function is 71 ~ 79 + PSET and if you had set Tour to 70, use Preset No: 1 ~ 9 +
Tour button to benefit the Tour function (70 + 1~9).
5.1.6

System Log

Press EVENT key and the System Log screen will appear.
Please refer 'SETUP>SYSTEM>System Log' to learn different events listed on the System Log and see how to delete the
System Log.
Go to OSD main menu
Run Group Tour 1~9
Run Pattern 1~9
button click.
button click.
46