Motion Event; Video Loss - Toshiba HDS-M5200 series User Manual

cameras can be set.
③ Select alarm outputs to be worked when Alarm In 1 is on. Please check
two alarm outputs can be set.
④ Select E-mail addresses for notification when Alarm In 1 is on. Please check
than two E-mail addresses can be set.
⑤ Repeat the above procedure for Alarm In 2~ Alarm In 4 (Up to 16 for Type B).
Choose 'OK' to confirm the setting.
4.6.2

Motion Event

Please click ( ) LINK>Motion Event and the following screen will appear.
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
① Click ( ) Motion Event frame and select Motion Event 1.
② Select cameras for recording when Motion Event 1 is on. Please check
two cameras can be set.
③ Select alarm outputs to be worked when Motion Event 1 is on. Please check
than two alarm outputs can be set.
④ Select E-mail addresses for notification when Motion Event 1 is on. Please check
More than two E-mail addresses can be set.
⑤ Repeat the above procedure for Motion Event 2~ Motion Event 16.
Click( )By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode: RECORD>Settings>Event
Choose 'OK' to confirm the setting.
4.6.3

Video Loss

Please click ( ) LINK>Video Loss and the following screen will appear.
a check box under Link Alarm Out. More than
a check box under Link Notification. More
a check box under Link Camera. More than
a check box under Link Alarm Out. More
41
a check box under Link Notification.