Full Seq; Quad Seq; X9 Seq; Spot Monitor - Toshiba HDS-M5200 series User Manual

The Main Monitor menu will allow user to adjust channel sequencing interval of Main monitor.

Full Seq

Adjust interval for 'Full screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.

Quad Seq

Use only with 8 / 16 channel DVRs.
Adjust interval for 'X4 Split Screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
'4 Split Screen sequencing' is disabled in the following modes.
–
8 channel DVR: 3x3 Mode
– 16 channel DVR: 4x4 Mode

X9 Seq

Use only with 16 channel DVR.
Adjust interval for 'X9 Split Screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
'9 Split Screen sequencing' is disabled in 4X4 Mode.
4.3.3

Spot Monitor

Please click ( ) DISPLAY>Spot Monitor and the following screen will appear.
This menu will allow adjust interval of channel sequencing of Spot monitor.
Click ( ) Spot Select to choose Spot monitor to be set up.
29