Settings; Continuous; Event; Emergency - Toshiba HDS-M5200 series User Manual

4.5.1

Settings

Please click ( ) RECORD>Settings and the following screen will appear.
There are three kinds of recording mode.
– Continuous: record continuously.
– Event: record only when Sensor or Motion calls.
–
Emergency: record when press EMERGENCY key.

Continuous

The Continuous menu will allow user to set recording mode.
Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.
Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 720x480, 720x240 and 360x240.
Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select one of
Super, High and Std.
Choose 'OK' to confirm the setting.

Event

Please click ( ) Event and the following screen will appear.
NTSC(PAL)
4 Channel DVR
8 Channel DVR
16 Channel DVR
360x240 720x240
120(100) 120(100)
240(200) 120(100)
480(400) 240(200)
36
720x480
60(50)
60(50)
120(100)