Devices; Network; Lan - Toshiba HDS-M5200 series User Manual

Check (check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
4.3.4 Spot Monitor Control on Display Mode
A Type
: Every click of the "SPOT" menu item on mouse right click menu will indicate "SP", "SP1" on the right bottom of
main monitor.
-
SP mode: Sequential display is activated as configured on spot monitor Setup menu.
-
SP1 mode: Displayed channel on Spot monitor 1 can be changed by pressing channel button.
Sequence stops at "SP1" mode
B Type
: Every click of the "SPOT" menu item on mouse right click menu will indicate "SP", "SP1", "SP2" and "SP3" on the
right bottom of main monitor. After "SP3", the it shows nothing. And system gets out of spot monitor control mode.
- SP mode : Sequence is activated as configured on spot monitor Setup menu.
- SP1 mode : Displayed channel on Spot monitor 1 can be changed by pressing channel button.
Sequence stops at "SP1" mode.
- SP2 mode : Displayed channel on Spot monitor 2 can be changed by pressing channel button.
Sequence stops at "SP2" mode.
- SP3 mode : Displayed channel on Spot monitor 3 can be changed by pressing channel button.
Sequence stops at "SP3" mode.
4.4

DEVICES

Please click ( ) DEVICES and the following screen will appear.
4.4.1

Network

Please click ( ) DEVICES>Network and the following screen will show.

LAN

Network Type
Please click ( ) Network Type. Every time click ( ), it changes to Static (fixed IP) and DHCP (floating IP).
In Static, user must manually set the static IP address for use.
–
Set IP Address, Subnet Mask and Gateway. Please ask your network administrator for more details.
30