Admin; Date/Time - Toshiba HDS-M5200 series User Manual

① Click ( ) Clear All Data frame.
② When a dialogue box asking "Remove All Data?" shows, choose 'OK'.
③ Then, Progress window will appear and the process starts.
④ When all data are deleted, a dialogue box asking "Are you sure to remove log?" will pop up.
⑤ Choose 'OK' to delete all the recorded data as well as System Log.
(NOTE)
This might take a while to completely delete all data. In case of 80GB HDD for example, it takes about 90 seconds.
When user finished all the necessary inputs to SYSTEM menu, please click ( ) 'OK' on the bottom to go back to SETUP
screen.
4.2.2

Admin

Please click ( ) SYSTEM>Admin and the following screen will appear.

Date/Time

Date
This menu will allow user to adjust the settings.
Please follow the procedure below for time adjustment.
① Click ( ) items (Y, M, D) to change. A designated item will be highlighted in a box (Y: Year, M: Month and D: Date).
② Adjust the number by clicking ( ) ▲, ▼ buttons on the right-hand side.
③ Repeat the same procedure to change Y, M and D.
Time
This menu will allow user to adjust the current time. The adjustment procedure is same as of Date.
CAUTION
IF ADJUSTED DATE/TIME IS PRIOR TO RECORDED DATA, DATA AFTER NEW DATE/TIME MAY BE ERASED.
CAUTION
ANY CHANGE IN DATE/TIME IS IMMEDIATELY APPLIED ON VIEWING SCREEN (LIVE), BUT THE DATE/TIME WHEN THE
RECORDING WAS DONE ARE NOT CHANGED. MAKE SURE TO REBOOT DVR AFTER CHANGING THE DATE/TIME. DO NOT
FORGET TO EXECUTE SHUTDOWN (SYSTEM>Shutdown) BEFORE REBOOT.
Time Zone
Please click ( ) Time Zone frame to see the list of nations and choose one.
Click ( ) a check box next to Use Daylight Saving Time. When user dwells in a region of DST area, please check it (i.e.
If DST is observed, please click ( ) Period and the following screen will appear.
21
).