Gigabyte GA-945GCMX-S2 User Manual page 43

О- Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
• • Enabled Enable this function.
• • Disabled Disable this function. (Default value)
Onboard Serial Port 1
• • Auto BIOS will automatically setup the port 1 address.
• • 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
•• 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
• • 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
• • 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
• • Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
•> Auto BIOS will automatically setup the port 2 address.
• • 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8/IRQ4.
• • 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value)
» 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8/IRQ4.
• • 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8/IRQ3.
• • Disabled Disable onboard Serial port 2.
Onboard Parallel Port
• • Disabled Disable onboard LPT port.
» 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value)
•> 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
• • 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
• • SPP Using Parallel port as Standard Parallel Port. (Default value)
• • EPP Using Parallel port as Enhanced Parallel Port.
•• ECP Using Parallel port as Extended Capabilities Port.
•• ECP+EPP Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
This item will be available when "Parallel Port Mode" set to "ECP" or "ECP+EPP".
• • 3 Set ECP Mode Use DMA to 3. (Default value)
• И Set ECP Mode Use DMA to 1.
- 41 -
BiOS Setup