Gigabyte GA-945GME-DS2 User Manual
  1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-945GME-DS2
  6. User manual
Gigabyte GA-945GME-DS2 User Manual

Gigabyte GA-945GME-DS2 User Manual

Intel coretm 2 extreme dual-core / coretm 2 duo / intel pentium d / pentium 4 lga775 processor motherboard
Hide thumbs Also See for GA-945GME-DS2:
Table of Contents

Advertisement

Quick Links

Download this manual
GA-945GME-DS2
Intel
Core
2 Extreme dual-core / Core
®
TM
Intel
Pentium
®
®
User's Manual
Rev. 2001
12ME-945GMEDR-2001R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
D / Pentium
4 LGA775 Processor Motherboard
®
(rev. 2.0)
2 Duo /
TM

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte GA-945GME-DS2

Summary of Contents for Gigabyte GA-945GME-DS2

  • Page 1 GA-945GME-DS2 (rev. 2.0) Intel Core 2 Extreme dual-core / Core 2 Duo / ® Intel Pentium D / Pentium 4 LGA775 Processor Motherboard ® ® ® User's Manual Rev. 2001 12ME-945GMEDR-2001R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!! * The WEEE marking applies only in European Union's member states.
  • Page 3 Copyright © 2006 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission.

  • Page 4: Table Of Contents

    Table of Contents Item Checklist ......................... 6 Optional Accessories ...................... 6 GA-945GME-DS2 (rev. 2.0) Motherboard Layout ............7 Block Diagram ........................ 8 Chapter 1 Hardware Installation ..................9 Considerations Prior to Installation ..............9 Feature Summary ..................10 Installation of the CPU and CPU Cooler ............12 1-3-1 Installation of the CPU ..................
  • Page 5 Chapter 3 Install Drivers ..................... 49 Install Chipset Drivers ..................49 Software Applications ..................50 Driver CD Information ..................50 Hardware Information ..................51 Contact Us ..................... 51 Chapter 4 Appendix ....................53 Unique Software Utilities ................53 4-1-1 EasyTune 5 Introduction ..................53 4-1-2 Xpress Recovery2 Introduction .................

  • Page 6: Item Checklist

    Item Checklist IDE Cable x 1 and FDD Cable x 1 SATA 3Gb/s Cable x 2 I/O Shield * The items listed above are for reference only, and are subject to change without notice. Optional Accessories 2 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-51/R) 4 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-21/R) S/PDIF In and Out Cable (Part Number: 12CR1-1SPINO-11/R) e-SATA Cable (Part Number: 12CF1-3SATPW-11R)

  • Page 7: Ga-945Gme-Ds2 (Rev. 2.0) Motherboard Layout

    GA-945GME-DS2 (rev. 2.0) Motherboard Layout CPU_FAN KB_MS ATX_12V LGA775 SYS_FAN Intel 945G ® AUDIO F_AUDIO PCIE_16 PCI1 Marvell 8001 PCI2 Intel ICH7 ® BATTERY PCI3 BIOS CLR_CMOS CODEC F_USB1 F_USB2 COMB CD_IN F_PANEL PWR_LED SPDIF_IO - 7 -...

  • Page 8: Block Diagram

    Block Diagram CPU CLK+/-(266/200/133 MHz) LGA775 PCIe CLK Processor (100 MHz) Host Interface DDRII 667/533/400 MHz DIMM (Note) Dual Channel Memory Intel 945G ® PCI Express x16 GMCH CLK (266/200/133 MHz) ATA33/66/100 IDE Channel BIOS PCI Express Bus 4 SATA 3Gb/s Intel ICH7 ®...

  • Page 9: Chapter 1 Hardware Installation

    Chapter 1 Hardware Installation Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1.

  • Page 10: Feature Summary

    1 front audio connector 1 CD In connector 1 S/PDIF In/Out connector 2 USB 2.0/1.1 connectors for additional 4 ports by cables 1 COMB connector 1 Chassis Intrusion connector 1 power LED connector GA-945GME-DS2 (rev. 2.0) Motherboard - 10 -...
  • Page 11 Rear Panel I/O 1 PS/2 keyboard port 1 PS/2 mouse port 1 parallel port 1 serial port (COMA) 1 VGA port 4 USB 2.0/1.1 ports 1 RJ-45 port 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out) I/O Control IT8718 chip...

  • Page 12: Installation Of The Cpu And Cpu Cooler

    (Grasping the CPU firmly between your thumb and forefinger, carefully place it into the socket in a straight and downwards motion. Avoid twisting or bending motions that might cause damage to the CPU during installation.) GA-945GME-DS2 (rev. 2.0) Motherboard - 12 -...

  • Page 13: Installation Of The Cpu Cooler

    1-3-2 Installation of the CPU Cooler Male Push Pin The top of Female Push Pin Female Push Pin Fig.1 Fig. 2 Please apply an even layer of CPU cooler paste (Turning the push pin along the direction of arrow is to on the surface of the installed CPU.

  • Page 14: Installation Of Memory

    DIMM socket. Then push it down. Fig.2 Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. GA-945GME-DS2 (rev. 2.0) Motherboard - 14 -...
  • Page 15 Dual Channel Memory Configuration The GA-945GME-DS2 supports the Dual Channel Technology. After operat- ing the Dual Channel Technology, the bandwidth of memory bus will double. The GA-945GME-DS2 includes 2 DIMM sockets. If you want to operate the Dual Channel Technology, please note the following explanations due to the limitation of Intel chipset specifications.

  • Page 16: Installation Of Expansion Cards

    When removing the graphics card, gently push back on the black lever on the slot and then lift the card straight out from the slot. GA-945GME-DS2 (rev. 2.0) Motherboard - 16 -...

  • Page 17: I/O Back Panel Introduction

    I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. Serial Port Connects to serial-based mouse or data processing devices.

  • Page 18: Connectors Introduction

    ). Please refer to the 2-/4-/6-/8- channel audio setup steps for detailed software configuration information. Connectors Introduction ATX_12V F_PANEL ATX (Power Connector) F_AUDIO CPU_FAN CD_IN SYS_FAN SPDIF_IO F_USB1 / F_USB2 COMB SATAII0 / 1 / 2 / 3 CLR_CMOS PWR_LED BATTERY GA-945GME-DS2 (rev. 2.0) Motherboard - 18 -...
  • Page 19 1/2) ATX_12V / ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly.
  • Page 20 FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector. GA-945GME-DS2 (rev. 2.0) Motherboard - 20 -...
  • Page 21 6) IDE (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device).
  • Page 22 (Or you can use a metal object to connect the positive and negative pins in the battery holder to make them short for five seconds.) 3. Re-install the battery. 4. Plug the power cord in and turn on the computer. GA-945GME-DS2 (rev. 2.0) Motherboard - 22 -...
  • Page 23 10) F_PANEL (Front Panel Jumper) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below. Message LED/ Speaker Connector Power Power/ Switch Sleep LED Reset Switch IDE Hard Disk Active LED...
  • Page 24 70 about the software settings. 12) CD_IN (CD IN Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition CD-L CD-R GA-945GME-DS2 (rev. 2.0) Motherboard - 24 -...
  • Page 25 13) SPDIF_IO (S/PDIF In/Out Connector) The S/PDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use S/PDIF IN feature only when your device has digital output function. Be careful with the polarity of the SPDIF_IO connector.
  • Page 26 You may clear the CMOS data to its default values by this header. To clear CMOS, temporarily short the two pins. Default doesn't include the jumper to avoid improper use of this header. Open: Normal Short: Clear CMOS GA-945GME-DS2 (rev. 2.0) Motherboard - 26 -...
  • Page 27 17) CI (Chassis Intrusion, Case Open) This 2-pin connector allows your system to detect if the chassis cover is removed. You can check the "Case Opened" status in BIOS Setup. Pin No. Definition Signal - 27 - Hardware Installation...
  • Page 28 GA-945GME-DS2 (rev. 2.0) Motherboard - 28 -...

  • Page 29: Chapter 2 Bios Setup

    Chapter 2 BIOS Setup BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required settings or to activate certain system features. The CMOS SETUP saves the configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS SRAM.

  • Page 30: The Main Menu (For Example: Bios Ver. : E1)

    This action makes the system reset to the default settings for stability. 3. The BIOS Setup menus described in this chapter are for reference only and may differ from the exact settings for your motherboard. GA-945GME-DS2 (rev. 2.0) Motherboard - 30 -...
  • Page 31 Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Integrated Peripherals This setup page includes all onboard peripherals. Power Management Setup This setup page includes all the items of Green function features.

  • Page 32: Standard Cmos Features

    Allows BIOS to automatically detect IDE/SATA devices during POST(default) • None Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. GA-945GME-DS2 (rev. 2.0) Motherboard - 32 -...
  • Page 33 Access Mode Use this to set the access mode for the hard drive. The two options are: Large/Auto(default:Auto) Capacity Capacity of currently installed hard drive. Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

  • Page 34: Advanced Bios Features

    The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) (Note) This item will show up when you install a processor which supports this function. GA-945GME-DS2 (rev. 2.0) Motherboard - 34 -...
  • Page 35 HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed. Enabled Enable HDD S.M.A.R.T. capability. Disabled Disable HDD S.M.A.R.T. capability. (Default value) CPU Hyper-Threading (Note) Enabled Enable CPU Hyper Threading Feature.

  • Page 36: Integrated Peripherals

    This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave. USB Controller Enabled Enable USB controller. (Default value) Disabled Disable USB controller. GA-945GME-DS2 (rev. 2.0) Motherboard - 36 -...
  • Page 37 USB 2.0 Controller You can disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 controller. (Default value) Disabled Disable USB 2.0 controller. USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support.
  • Page 38 Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. GA-945GME-DS2 (rev. 2.0) Motherboard - 38 -...
  • Page 39 Parallel Port Mode Using Parallel port as Standard Parallel Port. (Default value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA This item will be available when "Parallel Port Mode" set to "ECP" or "ECP+EPP". Set ECP Mode Use DMA to 3.

  • Page 40: Power Management Setup

    Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) Power On By Mouse Disabled Disable this function. (Default value) Double Click Double click on PS/2 mouse left button to power on the system. GA-945GME-DS2 (rev. 2.0) Motherboard - 40 -...
  • Page 41 Power On By Keyboard Disabled Disable this function. (Default value) Password Enter from 1 to 5 characters to set the keyboard power on password. Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power on the system.

  • Page 42: Pnp/Pci Configurations

    Auto assign IRQ to PCI 2. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2. PCI 3 IRQ Assignment Auto Auto assign IRQ to PCI 3. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3. GA-945GME-DS2 (rev. 2.0) Motherboard - 42 -...

  • Page 43: Pc Health Status

    PC Health Status CMOS Setup Utility-Copyright (C) 1984-2006 Award Software PC Health Status Reset Case Open Status [Disabled] Item Help Case Opened Menu Level Vcore DDR18V +3.3V +12V Current CPU Temperature Current CPU FAN Speed 2880 RPM Current SYSTEM FAN Speed CPU Warning Temperature [Disabled] CPU FAN Fail Warning...
  • Page 44 Note: In fact, the Voltage option can be used for CPU fans with 3-pin or 4-pin power cables. However, some 4-pin CPU fan power cables are not designed following Intel 4-Wire fans PWM control specifications. With such CPU fans, selecting PWM will not effectively reduce the fan speed. GA-945GME-DS2 (rev. 2.0) Motherboard - 44 -...

  • Page 45: Frequency/Voltage Control

    Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Frequency/Voltage Control CPU Clock Ratio [25X] Item Help (Note) System Memory Multiplier [Auto] Menu Level Memory Frequency (Mhz) : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults...

  • Page 46: Load Fail-Safe Defaults

    ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automati- cally detects. GA-945GME-DS2 (rev. 2.0) Motherboard - 46 -...

  • Page 47: Set Supervisor/User Password

    2-10 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Save & Exit Setup Enter Password: PC Health Status Exit Without Saving...

  • Page 48: Save & Exit Setup

    ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Abandon all Data Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility. GA-945GME-DS2 (rev. 2.0) Motherboard - 48 -...

  • Page 49: Chapter 3 Install Drivers

    Chapter 3 Install Drivers Pictures below are shown in Windows XP. Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the Run.exe.

  • Page 50: Software Applications

    This page displays all the tools that Gigabyte developed and some free software, you can choose anyone you want and press "install" to install them. Driver CD Information This page lists the contents of software and drivers in this CD-title. GA-945GME-DS2 (rev. 2.0) Motherboard - 50 -...

  • Page 51: Hardware Information

    Hardware Information This page lists all device you have for this motherboard. Contact Us Please see the last page for details. - 51 - Install Drivers...
  • Page 52 GA-945GME-DS2 (rev. 2.0) Motherboard - 52 -...

  • Page 53: Chapter 4 Appendix

    Chapter 4 Appendix Unique Software Utilities (Not all model support these Unique Software Utilities, please check your MB features.) 4-1-1 EasyTune 5 Introduction EasyTune 5 presents the most convenient Windows based system performance enhancement and manageability utility. Featuring several powerful yet easy to use tools such as 1) Overclocking for enhancing system performance, 2) C.I.A.

  • Page 54: Xpress Recovery2 Introduction

    2. System storage capacity and the reading/writing speed of the hard disk will affect the data backup speed. 3. It is recommended that Xpress Recovery2 be immediately installed once you complete installations of OS and all required drivers as well as software. GA-945GME-DS2 (rev. 2.0) Motherboard - 54 -...
  • Page 55 The Main Screen of Xpress Recovery2 1. RESTORE: Restore the backed-up data to your hard disk. (This button will not appear if there is no backup file.) 2. BACKUP: Back up data from hard disk. 3. REMOVE: Remove previously-created backup files to release disk space.

  • Page 56: Flash Bios Method Introduction

    Please note that because updating BIOS has potential risk, please do it with caution!! We are sorry that Gigabyte Technology Co., Ltd is not responsible for damages of system because of incorrect manipulation of updating BIOS to avoid any claims from end-users.
  • Page 57 Entering the Q-Flash utility: Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu. CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Select Language Advanced BIOS Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password...
  • Page 58 Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run :Move ESC:Reset F10:Power Off After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?" GA-945GME-DS2 (rev. 2.0) Motherboard - 58 -...
  • Page 59 3. Press Y button on your keyboard after you are sure to update BIOS. Then it will begin to update BIOS. The progress of updating BIOS will be displayed. Please do not take out the floppy disk when it begins flashing BIOS. 4.

  • Page 60: Updating Bios With Q-Flash Utility On Single-Bios Motherboards

    Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving Esc: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... GA-945GME-DS2 (rev. 2.0) Motherboard - 60 -...
  • Page 61 Exploring the Q-Flash utility screen The Q-FlashBIOS utility screen consists of the following key components. Q-Flash utility bar Q-Flash Utility V1.30 Flash Type/Size.........SST 49LF003A 256K Keep DMI Data Enable Task menu for Update BIOS from Floppy Q-Flash utility Save BIOS to Floppy Action bar Enter : Run :Move...
  • Page 62 6. Press Del to enter BIOS menu after system reboots and "Load BIOS Optimized Defaults". See how to Load BIOS Optimized Defaults, please kindly refer to Step 6 to 7 in Part One. Congratulation!! You have updated BIOS successfully!! GA-945GME-DS2 (rev. 2.0) Motherboard - 62 -...
  • Page 63 Method 2 : @BIOS Utility If you do not have a DOS startup disk, we recommend that you use the new @BIOS utility. @BIOS allows users to update their BIOS under Windows. Just select the desired @BIOS server to download the latest version of BIOS.
  • Page 64 Gigabyte's web site for downloading and updating it according to method II. IV. Please note that any interruption during updating will cause system unbooted. V. Do not use @BIOS and C.O.M. (Corporate Online Management) at the same time. GA-945GME-DS2 (rev. 2.0) Motherboard - 64 -...

  • Page 65: 4- / 6- / 8- Channel Audio Function Introduction

    4-1-4 2- / 4- / 6- / 8- Channel Audio Function Introduction The default speaker settings for the 6 audio jacks are as shown in the picture to the right. The jack retasking capability supported by HD Audio allows users to change the function for each audio jack by Center/Subwoofer Line In the audio software provided.
  • Page 66 After installation of the audio driver, you should find an Audio Manager icon in your system tray (you can also find the icon in Control Panel). Double- click the icon to open the Audio Control Panel. GA-945GME-DS2 (rev. 2.0) Motherboard - 66 -...
  • Page 67 STEP 2: In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 4CH Speaker. STEP 3: Connect the 4-channel speakers to the audio jacks on the motherboard and the surround cable, a small window will pop up and ask you what type of equipment is connected.
  • Page 68 After installation of the audio driver, you should find an Audio Manager icon in your system tray (you can also find the icon in Control Panel). Double- click the icon to open the Audio Control Panel. GA-945GME-DS2 (rev. 2.0) Motherboard - 68 -...
  • Page 69 STEP 2: In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 8CH Speaker. STEP 3: Connect the 8-channel speakers to the audio jacks on the motherboard and the surround cable, a small window will pop up and ask you what type of equipment is connected.
  • Page 70 Panel and click the Audio I/O tab. In the ANA- LOG area, click the Tool icon and then select the Disable front panel jack detection check box. This action completes the AC'97 Audio configuration. GA-945GME-DS2 (rev. 2.0) Motherboard - 70 -...

  • Page 71: Troubleshooting

    Troubleshooting Below is a collection of general asked questions. To check general asked questions based on a specific motherboard model, please log on to http://www.gigabyte.com.tw Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why? Answer: Some advanced options are hidden in new BIOS version.
  • Page 72 GA-945GME-DS2 (rev. 2.0) Motherboard - 72 -...
  • Page 73 - 73 - Appendix...
  • Page 74 GA-945GME-DS2 (rev. 2.0) Motherboard - 74 -...
  • Page 75 - 75 - Appendix...
  • Page 76 GA-945GME-DS2 (rev. 2.0) Motherboard - 76 -...
  • Page 77 - 77 - Appendix...
  • Page 78 GA-945GME-DS2 (rev. 2.0) Motherboard - 78 -...
  • Page 79 Shenyang Tech. Support: TEL: +86-24-83992901 http://rma.gigabyte-usa.com FAX: +86-24-83992909 Web address: http://www.gigabyte-latam.com India Japan GIGABYTE TECHNOLOGY (INDIA) LIMITED NIPPON GIGA-BYTE CORPORATION WEB address : http://www.gigabyte.in WEB address : http://www.gigabyte.co.jp Australia Singapore GIGABYTE TECHNOLOGY PTY. LTD. GIGA-BYTE SINGAPORE PTE. LTD. WEB address : http://www.gigabyte.com.au WEB address : http://www.gigabyte.com.sg...
  • Page 80 Representative Office Of GIGA-BYTE Technology Co., Ltd. in TURKEY WEB address : http://www.gigabyte.com.tr GIGABYTE Global Service System To submit a technical or non-technical (Sales/ Marketing) question, please link to : http://ggts.gigabyte.com.tw Then select your language to enter the system. GA-945GME-DS2 (rev. 2.0) Motherboard - 80 -...

Table of Contents