Baxi 828 Installer And Owner Manual page 17

INSTALLER AND OWNER GUIDE
Fitting the Coast and Style fascia.
1. The heater is supplied with two firefront hanging brackets. Locate these at the side of
the heater as in figure 20. Secure using four screws supplied.
2. Removing the fascia may have moved the magnets used to fix the fascia to the heater.
The magnets should be located as in figure 17.
3. Locate the fascia onto the heater. Ensure that the sides of the fascia sit on the floor /
hearth.
4. The rear of the firefront has two brackets that locate on to brackets on the heater.
Locate the firefront onto these brackets.
5. Place the loose pebbles / coals on top of the fuel support. It is not necessary to use all
the pebbles / coals supplied.
Figure 20.
©
Baxi Heating U.K. Limited 2006.
Page 16