Baxi 828 Installer And Owner Manual page 16

INSTALLER AND OWNER GUIDE
fascia.
4. Place the loose pebbles / coals on top of the fuel support. It is not necessary to use all
the pebbles / coals supplied.
Fitting the Capri, Flare and
Prelude fascia.
1. The fuel support must be fitted
to the heater before fitting the
fascia assembly. To do this, align
the four holes in the fuel support
with those on the heater (See
figure 18). Secure with the four
screws supplied.
2. Removing the fascia may have
moved the magnets used to fix
Figure 18.
the fascia to the heater. The
magnets should be located as
in figure 17.
3. Locate the fascia onto the
heater. Ensure that the sides of
the fascia sit on the floor /
hearth.
4. Locate the firefront hanging
screws into the keyhole slots in
the fuel support (See figure
19).
Figure 19.
5. Place the loose pebbles /
coals on top of the fuel support. It is not necessary to use all the pebbles / coals
supplied.
©
Baxi Heating U.K. Limited 2006.
Page 15