Cycle Options - Kenmore 970.C4804 Series Use & Care Manual

Front load washer
Hide thumbs Also See for 970.C4804 Series:
Table of Contents

Advertisement

Available languages

Available languages

Operating Instructions
SPIN SPEED
To protect your fabrics, not all spin speeds are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Extra High, High, Medium and Low spin speeds are
available for appropriate cycles. The spin speed and/or
duration of fi nal spin vary from model to model and cycle
to cycle.
Increasing the spin speed will extract more water, decrease
drying time and conserve energy. Decreasing the spin
speed will reduce wrinkling.
Select Low spin speed to gently spin items that should be
line dried.
Use No Spin to omit the fi nal spin at the end of the cycle.
The load will be very wet. Remove items from the wash
drum to drip dry or select a Rinse & Spin cycle to remove
excess water at a more convenient time.
SOIL LEVEL
Adjust the wash time in 3-minute increments based on the
soil level of each load. Heavy, Normal, and Light soil
levels are available.

Cycle Options

To select or delete the Chime, Stain Treat, Energy Saver, or
Extra Rinse, press Options until the blinking light indicates
the desired option. Then, while it is blinking, press Select.
The indicator will light when the option has been selected.
It will no longer be lighted when the option has been re-
moved.
Not all options are available on every model or are com-
patible with every cycle. The indicator will not light if the
option is not available with that cycle.
NOTE
To change the options once the cycle has begun, press
the PAUSE button, make the new selection and press
START again.
The options selected for the cycle will be remembered and
recalled each time that cycle is selected in the future. To re-
turn to factory settings, press the START/PAUSE and Select
buttons at the same time and hold until the signal sounds.
Chime
A signal will sound at the end of the cycle if this option
is selected. The signal has an adjustable volume level or
can be turned off .
Stain Treat
Use the Stain Treat option to add a 5-minute soak in the
middle of the wash portion of select cycles.
Energy Saver
The Energy Saver option reduces the warm water tem-
perature a few degrees to save energy and also extracts
more water to reduce drying time.
Extra Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended for
heavily soiled loads or if household members have sensi-
tive skin.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

970.c4805 series

Table of Contents