Download Print this page

Cycle Options - Kenmore 970L4814 Series Use & Care Manual

Front load washer
Hide thumbs


Operating Instructions

Cycle Options

To select or delete the Chime, Stain Treat, Energy Saver, or
Extra Rinse, press Options until the blinking light indicates
the desired option. Then, while it is blinking, press Select.
The indicator will light when the option has been selected.
It will no longer be lighted when the option has been re-
Not all options are available on every model or are com-
patible with every cycle. The indicator will not light if the
option is not available with that cycle.
To change the options once the cycle has begun, press
the PAUSE button, make the new selection and press
START again.
The options selected for the cycle will be remembered and
recalled each time that cycle is selected in the future. To re-
turn to factory settings, press the START/PAUSE and Select
buttons at the same time and hold until the signal sounds.
A signal will sound at the end of the cycle if this option
is selected. The signal has an adjustable volume level or
can be turned off .
Stain Treat
Use the Stain Treat option to add a 5-minute soak in the
middle of the wash portion of select cycles.
Energy Saver
The Energy Saver option reduces the warm water tem-
perature a few degrees to save energy and also extracts
more water to reduce drying time.
Extra Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended for
heavily soiled loads or if household members have sensi-
tive skin.

Hide quick links:



  Related Manuals for Kenmore 970L4814 Series