Zanussi ZDW 416 FS Instruction Booklet page 9

Loading your machine
Before placing dishes in the machine, remove any
scraps of food from the plates (small bones,
toothpicks, fish bones, scraps of meat and vegetables,
fruit skins etc.) to avoid clogging the filters and
consequently reducing performance.
Open the door and slide out the baskets to load the
dishes.
Use of the lower basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the
upper spray arm can turn freely.
UI22
UI21
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upward.
Mix spoons with the other cutlery to prevent them
sticking together.
Teaspoons may be loaded into the special slots provided
in the cutlery basket handle.
IEC 436 / DIN 44990
The cutlery basket is in two parts which can be separat-
ed to give greater loading flexibility. To separate the two
parts, slide them horizontally in opposite directions and
pull them apart. To reassemble, reverse the procedure.
UI07
The two rear rows of prongs on the lower basket can
be easily lowered to allow you to load pots, pans and
bowls.
To lower the prongs:
slightly pull them upward and let them drop down (see
picture); to bring them back to the standing position,
just pull them up again.
UI18
PCE24GB
9