H8DGU-LN4F+ Serverboard User's Manual
NIC3 (LAN3) LED
The LED connections for LAN3 are on pins
3 and 4 of JPK1. Attach LAN LED cables to
display network activity. See the table on the
right for pin defi nitions.
NIC4 (LAN4) LED
The LED connections for LAN4 are on pins
1 and 2 of JPK1. Attach LAN LED cables to
display network activity. See the table on the
right for pin defi nitions.
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB 2.0) are
located beside the Keyboard and Mouse PS2
ports (USB0/1). One additional Type A port
(USB6) is included on the motherboard. See
the table on the right for pin defi nitions.
USB Headers
Four USB 2.0 headers (USB2/3 and USB4/5)
are also included on the motherboard. These
may be connected to provide front side
access. A USB cable (not included) is needed
for the connection. See the table on the right
for pin defi nitions.
Chassis Intrusion
A Chassis Intrusion header is located at JL1.
Attach the appropriate cable to inform you of
a chassis intrusion.
Pin# Defi nition
3
4
Pin# Defi nition
1
2
Universal Serial Bus Ports
Pin Defi nitions (USB 0/1,
USB0
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
Universal Serial Bus Headers
Pin Defi nitions (USB2/3,
USB2
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Note: NC indicates no connection.
Chassis Intrusion
Pin# Defi nition
1
2
2-12
NIC3 LED
Pin Defi nitions
(JPK1)
Vcc
Ground
NIC4 LED
Pin Defi nitions
(JPK1)
Vcc
Ground
USB6)
USB1
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
USB4/5)
USB3
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
NC
Pin Defi nitions
(JL1)
Battery voltage
Intrusion signal