Table of Contents
Advertisement
Stripe Size
Access Policy: Select Read/Write, Read Only, or Blocked.
Read Policy: Use Ahead, Normal, or Adaptive.
Write Policy: Use WBack, WThru, or Bad BBU
IO Policy: Use this setting to read to a specific virtual disk. Cached mode
reads to buffered in cached memory and in Direct mode reads are not buff-
ered.
Disk Cache Policy: Enable, Disable, and Unchanged.
Disable BGI: Selecting Yes disables background initiation.
Select Size: Select the size for the virtual disk.
6.
Click Accept or Reset.
7.
Click Next.
8.
Preview the configuration and click
previous screen, and then click Yes to continue
3-4
Device Properties
This section gives an overview for the properties of the adapters, virtual disks,
and drives.
Adapter Properties
Click the Adapter Properties to see the definitions for each adapter. There are two
screens. The first screen is read-only. Click Next to see the second screen, which
settings can be adjusted. For more information on these settings, see the applica-
tion Help or LSI documentation. .
Chapter 3: WebBIOS Configuration
Accept to continue or Back to go to the
3-3
Advertisement
Table of Contents
