Related Manuals for Elinchrom Style BX 100
Summary of Contents for Elinchrom Style BX 100
- Page 1 Operating Manual Style BX 100/400 English Elinca S.A Style BX 01.09.2008 ENG (73286) Printed in Switzerland Multivoltage 90/260V...
-
Page 2: Table Of Contents
Synchronisation, Wireless Remote control and flash triggering Acoustic signal Troubleshooting 7, 10 Flashtube replacement DVD, «The beginner’s guide to light» Technical Data Elinchrom Accessories Guarantee P.S: Technical data subject to change. The listed values are guide values which may vary due to tolerances in components used. -
Page 3: Introduction
ELINCHROM in lighting products for the studio and the utilization of the latest technology in this area. Totally integrated to the range of the ELINCHROM flashes, the Style 100BX - 400BX units maintain the traditional look and function that is ELINCHROM. -
Page 4: Declaration Of Conformity, Disposal And Recycling, Ce Marking
Any components not reclaimed will be disposed of in a environmentally acceptable manner. If you have any question on disposal, please contact your local office or your local ELINCHROM agent (check our website for a list of all ELINCHROM agents world wide). -
Page 5: Safety Notice And Precaution
Safety notice According to safety regulations, we draw your attention to the fact that these electronic flash units are not designed for use outdoors, in damp or dusty conditions and should not be used after being exposed to sudden temperature changes causing condensation. They must always be connected to an earthed (grounded) mains supply. -
Page 6: Operating Instructions
Before connecting for the first time, check to make sure that your Modelling lamp coincides with the voltage line. They must always be connected to an earthed ( grounded) mains supply. All Style BX units have a bayonet mount and locking ring reflector fitting, for fixing all Elinchrom and Prolinca accessories. -
Page 7: Control Panel
Control Panel 14 15 Overview of controls 1. Mains inlet socket 12. + Power adjustment in 1/10 f-stops 2. Mains fuse (slow blow) 13. Modelling lamp switch 3. Mains light up on/off switch (on/off free or prop) 4. Modelling fuse (fast blow) 14.+ Modelling power control 5. -
Page 8: Switch And Fuse
See page 11: Troubleshooting This equipment is not user serviceable and contains high voltages which are dangerous. In the event of failure, please return the unit to an authorized Elinchrom service station. Mains Fuse Standard type 5 x 20 mm, (use only tempered fuse) 8 AT (code 19022) for Style 100BX and Style 400BX Note: Before exchanging a blown fuse, switch off the unit and remove mains cable. -
Page 9: Modelling Light
Modelling Light The touch pad (14) controls the modelling lamp on/off and the proportional light. Select the power with the touch pad (15). The modelling light output (100%) is achieved when the power value is set to maximum. Proportional modelling lamp, is set when the position "PROP" is selected (led is illuminated), the light output is proportional to the selected flash power. -
Page 10: Digital Power Display, Photo-Cell
Digital power display The actual flash power is displayed in a f-stop compatible format. The power range is 5 f-stops. The digital display, provides continuous power indication of the flash and modelling lamp. The controls cover a continuous output range from full power 1/1 to 1/16th in 1/10th, f-stop intervals. -
Page 11: Synchronisation, Wireless Remote Control And Flash Triggering
Universal receiver Transmitter Sychronisation socket The standard socket 3.5 mm mini-jack (6). N.B. Do not link ELINCHROM units by cable to other manufacturers sync Sync outlets. ELINCHROM uses the low voltage (5 V) for security reasons. Open flash "test" Test and Ready Having pressed the touch pad to release a flash, the green «READY»... -
Page 12: Flashtube Replacement
8. Check that the tube is correctly aligned (central) and that the trigger contact is gripping the tube, refix the security spring. 9. Re-connect and test the unit as usual. Training with Elinchrom lighting The Beginner’s Guide To Light / 72404 Only in English available. -
Page 13: Technical Data
• Central umbrella tube plus external fitting • Acoustic recharging signal • Mains cable • Synchro cord of 5m (jack 3.5mm plug) • Protective cover • Total compatibility with all Elinchrom accessories • Very fast recycling time • Very short flash duration Technical data 100BX... - Page 14 S in g le u n it s do not i nc l ude R e fl e ctor s - P rod uct r ang e a nd sp e cific at io ns s ub j e ct t o c h an g e. No g uar an tee fo r m ispr in ts .
-
Page 15: Guarantee
GUARANTEE This ELINCHROM product will be repaired free of charge by the vending agent if during a period of 24 months from date of purchase its working order is impaired through a manufacturing or material defect. The faulty product should be immediately sent to the authorized dealer or ELINCA agent. - Page 16 www.elinchrom.com...
Need help?
Do you have a question about the Style BX 100 and is the answer not in the manual?
Questions and answers