Use; Control Panel; Controls - Zanussi W902 Instruction Booklet

Use

Control panel

1 Programme guide
2 Drying time selector dial
Graduated up to 120 mins for cottons (black section)
and synthetics (grey section), this dial allows you to
select the desired drying time according to the type
and quantity of laundry and the required degree of
dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of
drying and this phase must in no circumstances be
reduced or interrupted.
3 Drying indicator light
This light illuminates when the machine is drying.
4 Mains-on light
This light illuminates when the machine starts
working and goes out when the ON/OFF button is
released.
5 On/Off button
By depressing this button the machine starts
operating.
When depressed again, the machine stops.
6 Quick wash button
By depressing this button on cotton programme B and
synthetic programme G the washing time will be
reduced by approx. 35 mins for cotton from COLD
to 60°C and by 20 mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
7 Temperature selector dial
Turn this dial clockwise or anti-clockwise to select
the required temperature.
Position
means that the machine will wash with
cold water.
8 Programme selector dial
Turn the dial clockwise to select the required wash
and drying programme.
Before setting the dial to any position the machine
must be switched off by depressing the ON/OFF
button again.
10