Drying Only; Automatic Washing And Drying - Zanussi W902 Instruction Booklet

Drying only

Warning! Do not exceed the maximum laundry
loads:
- 2.5 kg for linen and cottons
- 2 kg for synthetics.
The water tap must be open and the drain hose must
be positioned in the sink or connected to the drain
pipe.
1. Load the laundry
2. Select the drying programme F (for cotton) or J
(for synthetics).
3. Select the drying time in the black or grey section
of the selector, according to the fabrics (cotton or
synthetics) to dry.
4. Press the ON/OFF button
programme.
5. At the end of the cycle press the ON/OFF button
again to switch the appliance off.
6. Remove the laundry.

Automatic washing and drying

(NON-STOP programme)
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes of
2.5 kg for cotton and 2 kg for synthetics.
1. Load the laundry.
2. Add detergent and additive.
3. Select the wash programme.
4. Select the drying time.
5. Start the programme by depressing the ON/OFF
to start the
6. At the end of the programme press the ON/OFF
7. Remove the laundry.
17
Do not use dosing device/ball when carrying
out a NON-STOP programme. The plastic
material with which it is made cannot
withstand the high temperature in the drum
during drying.
button.
button again to switch the machine off.