Iii. Switching On The Device - Medion Navigation Unit Operating Instructions Manual

III. Switching on the Device

You will switch your navigation device on or off again completely by pressing and hold-
ing the On/Off key (> 3 sec.).
The Navigation System will start the initial installation automatically. The brand logo will
appear and your device will display the application screen after a few seconds.
Button Description
Note
Brief pressure on the On/Off button will be enough to switch the
device on or off, provided that your navigation system is connected to an
external source of electricity or is running in battery operation (standby
mode).
You can adjust the period of operation to suit your needs using the
Settings button on the main screen of your device. Your device is deliv-
ered in a status in which it will not switch off independently.
Press and hold the On/Off key (> 3 sec.), to completely switch off the
device.
No data will be lost as data is stored in the internal memory. The starting
process will only take slightly longer.
Your navigation system will use a low amount of electricity and the batteries will be dis-
charged, even when in standby mode.
UK/ N. IRELAND HELPLINE 0871 37 61 020
REP. IRELAND HELPLINE 1-800-992508
Navigation,
page 23
Travel Guide,
page 34
Alarm Clock,
page 35
Picture Viewer,
page 29
Sudoku, page 40
Settings
Main Screen
- 13 -