Dirt Devil Vision Canister Owner's Manual page 6

Table of Contents

Advertisement

DIRT CONTAINER REMOVAL & REPLACEMENT
1.
Diagram 1
Remove dirt container by lifting from the front.
CLEANING DIRT CONTAINER & FILTER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE SERVICING.
REMOVE & EMPTY DIRT CONTAINER: FOR BEST RESULTS EMPTY DIRT CONTAINER AFTER EACH USE.
WARNING: DO NOT USE DIRT CONTAINER HANDLE TO CARRY CLEANER.
1. Remove dirt container by lifting from the front (Diagram 1). Tilt dirt container straight up and out of canister (Diagram
2. Remove filter assembly to empty and clean dirt container (Diagram 3).
3. Before replacing filter, shake dirt from filter.
by shaking or brushing the dirt out of the pleats. After continuous usage the filter may need to be replaced.
4. Place the tab on the front of the dirt container in the slot on the front of the canister when returning the dirt container
and lock handle in place (Diagram 1).
CLEANING DIRT CONTAINER:
1. Use a sponge and lukewarm water to wipe compartment clean. Let dry completely before using again.
1.
Diagram 1
Remove dirt container from canister.
FILTER REMOVAL & REPLACEMENT
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
1. Remove dirt container from canister (Diagram 1).
2. To replace filter-remove filter assembly from dirt container (Dia
3. To replace exhaust filter on top of the cleaner - lift the filter cover (Diagram 3). Remove and replace the filter cassette
Close filter cover.
4. Place the tab on the front of the dirt container in the slot on the front of the canister when returning the dirt container
(Diagram 1).
5. Filter replacements can be ordered by calling toll free 1-800-321-1
MICRO FRESH EXHAUST FILTER
• Our unique filtration system for over 99.9% "fresh" exhaust air.
• Ideal for allergy sufferers.
2.
Diagram 2
Tilt dirt container straight up and out of canister.
NOTE: The pleated filter is attached to the dirt container lid. It can be cleaned periodically
FILTER REMOVAL & REPLACEMENT
2.
Filter
Diagram 2
Replace filter.
3.
Exhaust Filter
Diagram 3
Lift the filter cover to replace exhaust fil-
ter.
gram 2). Discard old filter. Replace with new filter.
134. Filter part# 2-260440-000. Exhaust Filter part #2-260230-000.
6
3.
Diagram 3
Remove filter to empty and clean dirt container.
to its position,
4.
Diagram 4
Replace exhaust filter
to its position
2).
(Diagram 4).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents