Set The Alarm; Stop The Alarm; Snooze Function; Display Brightness - Radio Shack 6300695 User Manual

Set the Alarm

1. Press and hold AL1 or AL2, then press HOUR to set
the hour.
2. Press and hold AL1 or AL2, then press MINUTE to
set the minute.
3. Press AL1 or AL2 to review the current alarm time.

Stop the Alarm

• Press AL1 or AL2 when the ALARM sounds to enter
the 24-hour reset mode. The alarm will sound again at
the same time next day.
• Slide ON/OFF switch to OFF for AL1 or AL2 to cancel
AL1/AL2 completely.

Snooze Function

When the alarm sounds, press SNOOZE. The alarm
indicator flashes, when the snooze function is activated,
and the alarm will stop for 9 minutes. Press SNOOZE
again when the alarm sounds to stop the alarm for 9
more minutes. The snooze operation can be repeated for
up to 2 hours.

Display Brightness

Slide DIMMER to LO or HI to adjust the LED display
brightness.
5