Speed Dial - Toshiba Strata DK8 User Manual

STRATA DK STANDARD TELEPHONE
To Store a Station Speed Dial
Number:
1. Lift the handset.
2. Dial 6 6.
3. Dial # * .
4. Enter the access code (1 0 ~
4 9) where you wish to store
the telephone number.
5. Dial the CO line number
access code to be stored.
6. Enter the telephone number.
7. Dial #.
To Make a Call with a Station or
System Speed Dial Code:
1. Lift the handset.
1-14

SPEED DIAL

Speed Dial enables you to call telephone numbers by dialing a brief
access code, instead of having to dial the entire telephone number.
There are two types of Speed Dial numbers. Station Speed Dial numbers
are assigned by individual station users to their own station and can only
be dialed at their station. System Speed Dial numbers are assigned only
by Station 10 (typically the system administrator's or operator's station),
but can be used by other stations.
You will hear intercom dial tone after you lift the handset.
You will hear a short tone after you dial 6 6.
Station Speed Dial number access codes are 1 0 ~ 4 9.
CO line number access codes are 7 0 1 ~ 7 0 4 (for DK8) and 7 0 1 ~
7 0 8 (for DK16). With some systems, you may have to dial either the
general group code (9), Least Cost Routing (LCR) code (9), or a Line
Group code (8 1 ~ 8 4 for DK8; 8 1 ~ 8 8 for DK16), instead of a CO line
number access code.
The number can be up to 20 digits, including the CO line access code.
You will hear confirmation tone. The CO line access code and the
telephone number will be stored and will be dialed when you dial the
Speed Dial access code.
Repeat this procedure to replace the stored telephone number with a
new one.
You will hear intercom dial tone after you lift the handset.
FEATURE OPERATION