Flash Co Line; Account Code Calls; Forced Account Codes - Toshiba Strata DK8 User Manual

STRATA DK STANDARD TELEPHONE
To Flash a CO Line:
1. Momentarily press (for about
1/2 second) the hookswitch.
2. Dial 4 5.
To Record a Forced Account
Code:
1. Lift the handset.
2. Dial a CO line number access
code.
3. Enter the Forced Account
Code.

FLASH CO LINE

Some CO line features like conferencing, Centrex features, or behind
PBX operation require "flashing" the CO (or Centrex) line.
The hookswitch is located in the handset cradle of your telephone. After
you press the hookswitch, you will hear intercom dial tone. (Some
telephones may have a special button which flashes the hookswitch
when pressed.)
You will hear Centrex or PBX dial tone.

ACCOUNT CODE CALLS

Account Codes can be used for a variety of reasons, including billing, call
tracking, and line restriction applications. The system records the
Account Codes and can print them out along with other call details on a
Station Message Detail Recording (SMDR) report.

FORCED ACCOUNT CODES

Some applications may require that you enter an Account Code, called a
Forced Account Code, before dialing a telephone number. Forced
Account Codes can be recorded for outgoing calls only.
You will hear intercom dial tone.
CO line number access codes are 7 0 1 ~ 7 0 4 (for DK8) and 7 0 1 ~
7 0 8 (for DK16). With some systems, you may have to dial either the
general group code (9), Least Cost Routing code (9), or a Line Group
code (8 1 ~ 8 4 for DK8; 8 1 ~ 8 8 for DK16), instead of a CO line number
access code.
If you dialed a CO line access code, you will hear dial tone after you
press the last digit of a valid account code or busy tone after you press
the last digit of an invalid code.
FEATURE OPERATION
1-9