Stopping The Engine; Leaving The Watercraft - Yamaha FX High Output WaveRunner 2007 Owner's/Operator's Manual

Table of Contents

Advertisement

(4) Push the start switch (green button), and
then release it as soon as the engine
starts to run.
NOTE:
The engine will not start if the throttle lever is
squeezed.
ECJ00480
CAUTION:
Never push the start switch while the en-
G
gine is running.
Do not operate the start switch for more
G
than 5 seconds, otherwise the battery
will be discharged and the engine will
not start. Also, the starter motor could
be damaged. If the engine does not start
in 5 seconds, release the start switch,
wait 15 seconds, and then try again.
EJU32860

Stopping the engine

To stop the engine, release the throttle lever,
and then push the engine stop switch (red
button).
EWJ00600
WARNING
You need throttle to steer. Shutting the en-
gine off can cause you to hit an obstacle
you are attempting to avoid. A collision
could result in severe injury or death.
EJU32880

Leaving the watercraft

If leaving the watercraft, select the lock mode
of the Yamaha Security System and remove
the engine shut-off cord to reduce the chance
of accidental starting or unauthorized use by
children or others. (See page 38 for Yamaha
Security System and low-RPM mode selec-
tion procedures.)
Operation
68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 waverunner fx cruiser high output

Table of Contents