Stopping The Engine; Leaving The Watercraft; Operating The Watercraft - Yamaha WaveRunner VX Cruiser HO 2020 Owner's/Operator's Manual

is attached correctly. If the engine
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident.
[EWJ00582]
1 Clip
2 Engine shut-off switch
3 Engine shut-off cord (lanyard)
(4) With the throttle lever released, push the
start switch (green button) to start the
engine. (See page 27 for information on
operating the start switch.)
EJU32863

Stopping the engine

Release the throttle lever, and then push the
engine stop switch (red button) to stop the
engine. WARNING! You need throttle to
steer. Shutting the engine off can cause
you to hit an obstacle you are attempting
2
1
3
to avoid. A collision could result in severe
injury or death.
[EWJ00602]
EJU32873

Leaving the watercraft

If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
dental starting or unauthorized operation by
children or others.
EJU43411

Operating the watercraft

When the throttle lever is squeezed, the "F"
(forward) shift indicator will be displayed and
the watercraft will move forward. While the
"F" (forward) shift indicator is displayed, the
watercraft will move forward at trolling speed
even if the throttle lever is in the fully closed
Operation
70