ELECTRICAL CONNECTION
To connect the supply cable:
Remove the screws securing the cover "A" on the
–
rear of the cooker (fig. 7.2).
Feed the supply cable through the cable clamp "D".
–
The supply cable must be of a suitable size for the
current requirements of the appliance; see the
section "Feeder cable section".
Connect the wires to the terminal block "B" as
–
shown in the diagram in figure 7.1.
Take up any slack in the cable and secure with the
–
cable clamp "D".
Replace the cover "A".
–
Fig. 7.2
REPAIRS
Before effecting any intervention on the
electrical
parts
of
connection
t o
the
interrupted.
the appliance,
the
network
must
b e
25