PERIODIC MAINTENANCE AND MINOR REPAIR
1. Do not touch the glass part of the bulb.
5. Connect the coupler, and then in-
stall the headlight bulb holder cov-
er by turning it clockwise.
6
To replace the low beam headlight bulb
1. Disconnect the headlight coupler,
and then remove the defective
bulb by turning it counterclock-
wise.
1. Headlight coupler
2. Headlight bulb
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
2. Install the bulb by turning it clock-
wise.
CAUTION:
Take care not to damage the follow-
ing parts:
6-29
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
EWA10790
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
ECA10650
1. Do not touch the glass part of the bulb.