Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU (Video mode)
Picture
Audio
Timer
Function
MENU
Setup
Language
Select
OK Set
Selected characters
System
Colour System
AV1~AV5
Video Input
AV1
AV4
Scart Output
RGB1
RGB2 (1st step)
RGB2 (2nd step)
Setup
System
Colour System
Video Input
Scart Output
RGB1
RGB2
Select
OK
Setup
System
Colour System
Video Input
Scart Output
RGB1
RGB2
Select
OK
System1
System2
System1
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
System2
Auto
NTSC-M
PAL-N
PAL-M
S.Video
Composite
Auto
HDTV
SDTV/DVD
TV
Monitor
DVI-PC
DVI-STB
RGB
Component
Auto
HDTV
SDTV/DVD
Setup
System 1
Colour System
Monitor
DVI-STB
Component
HDTV
Set
Return
Select
Setup
System 1
Video Input
Monitor
DVI-STB
Component
HDTV
Set
Return
Select
Do not change the original setting.
(System1 : Europe/Asia, System2 : North America)
This should correspond to the colour system of the signal from the
equipment that is connected to AV1~AV5 video input terminal.
• Normally, set this to Auto. The system of the input signal will be
automatically recognized.
• If the input signal contains much noise or has a low level at Auto
and the operation is found erratic, set this to match the input
signal.
• When the component signal is received, this would be not
available (greyed out).
This should correspond to the signal mode of the signal from the
equipment that is connected to AV1 Scart input.
This should correspond to the signal mode of the signal from the
equipment that is connected to AV4 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal
will be automatically recognized.
• If the input signal contains much noise or has a low level at Auto
and the operation is found erratic, set this to match the input
signal.
TV:AV1 (Scart) output will be fixed as TV signal output.
Monitor:AV1 (Scart) output can view the image as on the main
unit. But it is possible to monitor only the composite video signal
from AV2, AV3, AV4, or AV5 input that is displayed on the screen
at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB1 DVI terminal.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
This step should be set only when [Component] is selected on the
1st step.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
• Normally, set this to Auto. The signal mode of the input signal
will be automatically recognized.
• If the input signal contains much noise or has a low level at Auto
and the operation is found erratic, set this to match the input
signal.
AV1
Auto
AV2
PAL
AV3
SECAM
AV4
PAL
AV5
Auto
Return
Exit
AV1
Composite
AV4
Auto
Return
Exit
Setup hint
29
Advertisement
Table of Contents
