Yamaha PDM-4220 User Manual page 19

High definition plasma monitor
Hide thumbs Also See for PDM-4220:
Table of Contents

Advertisement

OPERATING INSTRUCTIONS (continued)
Size Switching (continued)
When you want to
Play a 14:9 image in a 16:9 screen
expanded vertically and squeezed
horizontally.
Play a 14:9 image expanded vertically on
the 16:9 screen.
Vertical picture position can be adjusted for [Panoramic], [Zoom], [C14 : 9L] and [14 : 9Zoom] mode as follows.
1. Press the SIZE button and
2. Position display will appear.
3. Adjustment range of each picture size are as shown below.
[Panoramic]
[Zoom]
[C14 : 9L] and [14 : 9Zoom]
4. When 1080i/60 component signal is received, vertical position can be adjusted only one step up. (The range: 0 to +1)
ATTENTION
Using a wide-screen monitor
• This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV
program, the image will appear different from the original. Take this into consideration when making screen mode choices.
• Use of this monitor in its enlarged display mode with the wide feature enabled in coffee shops, hotels and other establishments for
commercial or public viewing purposes could infringe on the copyright holder's rights protected by Copyright Law.
• When a normal 4:3 image is displayed over the entire screen in the Panoramic mode, parts of the periphery of the image may disappear
and/or appear distorted in some cases. Use the 4:3 mode to view images which were created in 4:3 mode.
This mode allows 4:3 content to be viewed without picture distortion.
• During RGB Input (RGB1 (set to [DVI-PC]) and RGB2 (set to [RGB]))
Normal
Real
Zoom3
*
* Real mode gives the image of the same shape as it is displayed on a computer monitor.
This mode is only available for VGA (640 X 480) and WVGA (864 X 480).
Display area selection diagram (RGB input)
Resolution
Full display
Display
640 X 480
(VGA)
800 X 600
(SVGA)
1024 X 768
(XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a possibility
that flicker may become noticeable on Zoom (1 ~ 3) depending on the display contents. If this occurs, turning the Vertical Filter On
reduce the flicker.
20
Set the display size
C14 : 9L
14 : 9Zoom
SELECT buttons during picture size display.
- 12 to + 12
- 31 to + 31
- 16 to + 16
Position + 31
Press
Full
Zoom1
Zoom2
Full
Normal
Input signal
Display screen
(14:9 signal)
(14:9 signal)
Position - 31
Press
Circular display
Real
Zoom1
* VGA and W-VGA
only
Remarks
This mode is provided for the broadcasting
program with WSS code-C14:9L.
This mode is provided for the broadcasting
program with WSS code-14:9Zoom.
Zoom2
Zoom3
31
can

Advertisement

Table of Contents
loading

Table of Contents