Yamaha PDM-4220 User Manual page 33

OPERATING INSTRUCTIONS (continued)
PICTURE MENU (TV/Video mode) (continued)
Selected characters
Picture Mode
Contrast
Brightness
Colour
Sharpness
Hue
Colour Temperature
Contrast Mode
Reset
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Colour Temp. Adjustment
Red
Amplitude
Green
Blue
Red
Cut Off
Green
Blue
34
Dynamic Natural
Narrows the gap between Broadedns the gap between
brightness and darkness. brightness and darkness.
Black is subdued for Black is set off for increased
increased overall darkness. overall brightness.
Decrease colour intensity. Increase colour intensity.
Soft Sharp
Enhances red and weakens Enhances green and weakens
green. red.
Cool Normal Warm
Normal Auto
(off the function) (waiting to reset)
Off Low
Off
Off
Off Low Middle
Off
Off
Brightness scene is Brighter scene is increased in
decreased in reddish colour. reddish colour.
Brightness scene is Brighter scene is increased in
decreased in greenish colour. greenish colour.
Brightness scene is Brighter scene is increased in
decreased in bluish colour. bluish colour.
Dark scene is decreased in Dark scene is increased in
reddish colour. reddish colour.
Dark scene is decreased in Dark scene is increased in
greenish colour. greenish colour.
Dark scene is decreased in Dark scene is increased in
bluish colour. bluish colour.
Dynamic: This setting is best for very bright ambient lighting.
Cinema
Natural: This setting is for normal lighting conditions.
Cinema: This setting is best for watching movie.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
SELECT button at [+31]. The colour for [+32] to [+40] numbers
will change from green to magenta. This special mode is better
for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when
this Contrast setting is adjusted.
Adjust to preference.
Adjust to preference.
Shift to the minus (-) side for a softer effect and plus (+) for
sharper picture.
This is not available to adjust when receiving PAL/SECAM
signal.
Then the character will be greyed out.
Adjust for most realistic skin colour.
Black / White
Normally set to Cool.
Dynamic: Emphasizes the differences between video shadings
Dynamic
Normal:
Auto:
The original factory settings for the items of this Menu page can
be restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce
High noise.
Performs colour signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.
On: Automatically detects the movie film material and faithfully
On
Off: Set to OFF when switching between images does not
This is available only when receiving a PAL composite signal.
On
Turn On to reduce the discolorations in fine picture detail and
provides purer colour.
Adjusts the sharpness of the picture signal.
High
Adjusts the sharpness of the colour signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/
S.Video signal. This monitors and adjusts the colour to maintain
On
constant colour levels. It also maintains natural flesh tones whilst
preserving fidelity of background colours.
Turn On when you wish to change colour temperature
On
depending on the user's preference.
Adjust colour temperature depending on the user's preference.
These settings are independently stored in each of the 4 Colour
Temperature modes.
Setup hint
to improve the feeling of contrast.
The gradation of an image is reproduced as faithfully
as possible.
Detects image brightness and automatically adjusts
for natural brightness.
reproduces the original film image.
appear natural.