Yamaha RX-V359 Owner's Manual page 7

A EON
Selects a radio program type (NEWS, AFFAIRS, INFO,
or SPORT) for automatic tuning.
B PTY SEEK START
Starts searching for a station once the desired program
type is selected in the PTY SEEK mode.
C TUNING MODE
Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off).
D VOLUME
Controls the output level of all audio channels.
Note
This does not affect the AUDIO OUT (REC) level.
E PHONES jack
Outputs audio signals for private listening with
headphones.
Notes
• When you connect headphones, no signals are output at the
SUBWOOFER OUTPUT jack or at the SPEAKERS terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
F SPEAKERS
Turns on or off the set of front speakers connected to the A
and/or B terminals on the rear panel.
G STRAIGHT
Turns the sound field programs off or on. When this unit is
in the "STRAIGHT" mode, 2-channel or multi-channel
input signals are output directly from their respective
speakers without effect processing.
H TONE CONTROL
Adjusts the bass/treble balance of the front left and right
speakers in conjunction with BASS/TREBLE +/–.
I BASS/TREBLE +/–
Adjusts the bass/treble balance of the front left and right
speakers in conjunction with TONE CONTROL.
J PROGRAM l / h
Selects sound field programs.
K INPUT MODE
Selects either digital or analog input signals exclusively or
sets this unit to automatically detect the type of input
signals and select the corresponding input signals when
one component is connected via both digital and analog
connections.
L INPUT l / h
Selects the desired input source.
M MULTI CH INPUT
Selects the component connected to the MULTI CH
INPUT jacks as the input source.
Note
The input source connected to the MULTI CH INPUT jacks takes
priority over the source selected with INPUT l / h on the front
panel (or the input selector buttons on the remote control).
CONTROLS AND FUNCTIONS
5