Yamaha RX-V359 Owner's Manual page 34

SOUND FIELD PROGRAMS
Enjoying 2-channel sources using the
standard decoders
Signals input from 2-channel sources can also be played
back on multi-channels.
Press STANDARD on the remote control
repeatedly to select a decoder.
STANDARD
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.
STANDARD
Dolby Pro Logic processing for any
PRO LOGIC
sources
Dolby Pro Logic II processing for
PLII Movie
movie sources
Dolby Pro Logic II processing for
PLII Music
music sources
y
You can also select a decoder by pressing +/– on the remote
control while the decoder type is displayed in the front panel
display.
32
Functions
Editing sound fields parameters
You can enjoy good quality sound with the factory preset
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
1
While listening to a source, press u / d on
the remote control to select the parameters.
2
Press +/– to change parameter value.
Note
You cannot change parameter values when "MEM. GUARD" in
"OPTION MENU" is set to "ON" (see page 48).