Removing A Wheel - Yamaha RAPTOR 350 Owner's Manual

1. Remove the lens by removing the screws.
1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
8
1. Tail/brake light bulb
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
ECB00700
CAUTION:
Do not overtighten the screws, otherwise the
lens may break.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8-42