Binatone GK-1231 Instruction Manual page 7

Only use non-abrasive cleansers.
3. In order to clean the filter (3), remove it and wash it on both
sides in clean water. The filter should be washed often irre-
spective of any scale build-up.
4. Store the appliance only after its parts are completely dry.
USEFUL RECOMMENDATIONS
kettle on a regular basis especially in areas with
high water hardness as this will keep it in working
order. Excessive scale build-up can result in the
malfunction of you're appliance. The frequency
of scale cleaning depends on the level of water
hardness and on the frequency of the use of the
kettle (for example, one cleaning after 200 times use). If your
water has a high level of hardness, our advice is to use a water
filter, as that will decrease the scale build-up.
2 methods to remove scale:
1 . Using 9% white vinegar:
– Fill the kettle with 0.5 liter of hot water and add 2 table-
spoons of 9% white vinegar.
– Let the kettle soak for 1 hour without boiling.
– Stir the liquid in the kettle from time to time.
– Pour out the liquid and wash it out 2-3 times with cold clean
water.
2 . Using citric acid:
– Mix 25 g of citric acid with 0.5 liter of hot water in the kettle.
– Let it soak for 15 minutes.
– Stir the water from time to time.
– Pour out the liquid and wash it out 2-3 times with cold clean
water.
– Repeat the procedure again if required.
All other maintenance works should be performed at an au-
thorized service center.
Do not store the kettle whilst hot or plugged to the mains. If you
don't intend using the kettle again store it when it has cooled
down. Always store it in a box in a safe, dry place out of reach of
children.
1. Unplug the kettle and wait for the kettle to
become fully cooled down before cleaning
and storage.
2. To avoid electric shock, do not plunge the
kettle body (5), its base (8) and power
cord into water. The kettle element can be
cleaned with a clean damp lint free cloth.
It is necessary to remove the scale from the