Dvi extender over single lc fiber with tmds video and edid data (9 pages)
Summary of Contents for Avenview VGA-C5A-R
Page 1
Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview VGA-C5A-R, VGA and Audio Extender over Single CAT5/CAT6 with RGB Delay Control has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the VGA-C5A-SET should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. Page|4 www.avenview.com...
INTRODUCTION With only one cost effective CAT-5e cable, the Avenview VGA-C5A-R lets you extend VGA (WUXGA) to cover the distance up to 300m (1,000ft). With built-in EQ and GAIN control, the transmission path can be adjusted to adapt the cable quality and video bandwidth. Furthermore, the VGA RGB delay control [de-skew] function provides the compensation among R, G, B signals due to long transmission or through normal LAN cable.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. Page|6 www.avenview.com...
PANEL DESCRIPTION INPUT PANEL (Receiver, VGA-C5A-R) 1. 5V 2A DC Power Connector 2. RJ45 IN for CAT5 cable 3. EQ: Rotary Control for equalization of R, 4. GAIN: Rotary control for Gain Control of R, G, B respectively G, B respectively 5.
Connect CAT5/CAT6 cable between Transmitter (VGA-C5-SP8) and Receiver (VGA-C5A-R) Ensure that cables are tightly connected Plug in 5V 2ADC power adapter to the power jack of the Receiver VGA-C5A-R. Plug in 5V 4ADC power adapter to the power jack of the Transmitter VGA-C5-SP8.
Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
Need help?
Do you have a question about the VGA-C5A-R and is the answer not in the manual?
Questions and answers