Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb; Removing A Wheel - Yamaha GRIZZLY 350 Owner's Manual

ECB00670
CAUTION:
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
7. Adjust the headlight beam if necessary.
EBU25550

Adjusting a headlight beam

ECB00690
CAUTION:
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting
screw in direction (a).
8
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
EBU25580

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8-40