1. Headlight fuse
2. Ignition fuse
3. Signaling system fuse
4. Spare fuse
The main fuse and the fuse box are located under
the seat. (See page 4-12.)
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
ECB00640
CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuses:
Main fuse:
30.0 A
Headlight fuse:
15.0 A
Ignition fuse:
15.0 A
Signaling system fuse:
10.0 A
EWB02151
POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system, which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
8-37
WARNING
8