Valve Clearance; Adjusting The Drive Select Lever Safety System Cable; Checking The Front Brake Pads And Rear Brake Shoes - Yamaha GRIZZLY 350 Owner's Manual

1. Locknut
2. Throttle cable free play adjusting bolt
3. Throttle cable free play
3. Tighten the locknut.
EBU24060

Valve clearance

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To
prevent this from occurring, the valve clearance
must be adjusted by a Yamaha dealer at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
EBU24070
Adjusting the drive select lever safety
system cable
The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
EBU24120
Checking the front brake pads and rear
brake shoes
The front brake pads and the rear brake shoes
must be checked for wear at the intervals specified
in the periodic maintenance and lubrication chart.
EBU24171
Front brake pads
Check each front brake pad for damage and mea-
sure the lining thickness. If a brake pad is dam-
aged or if the lining thickness is less than 1.0 mm
(0.04 in), have a Yamaha dealer replace the brake
pads as a set.
8-25
8