Brake Light Switches - Yamaha GRIZZLY 350 Owner's Manual

1. Locknut
2. Brake lever free play adjusting bolt
4. Tighten the locknut at the brake lever.
NOTE:
When adjusting the rear brake lever free play:
G
Be sure not to step on the brake pedal.
G Make sure the brake pedal does not move.
EWB02020
WARNING
POTENTIAL HAZARD
Operating with improperly serviced or ad-
justed brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could
lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:
G
Make sure the brakes operate smoothly
and that the free play is correct.
G
Make sure the brakes do not drag.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
EBU24751

Brake light switches

The operation of the brake light switches must be
checked and, if necessary, adjusted at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
1. Remove panel A. (See page 8-8.)
NOTE:
The brake light switch is properly adjusted when
the brake light comes on just before braking takes
effect.
8-31
8