Dear customer We thank you for choosing a ceramic hob of ZANKER. Thus you chose quality, innovation and durability. These operating and assembly instructions will allow you to become acquainted with the appliance and to do everything within its possibilities.
Unpacking and control Please examine the appliance for any damage sustained during transportati- on! If the appliance is damaged please immediately inform the forwarding com- pany before the appliance is con- nected. The packing material should be disposed properly. Preparation for installation Cut out worktop to prescribed measurements or templates (saw exactly along the scribing).
/switch box is to be checked by referring to the appropriate instructions for installation and operation. Using other hobs than those of the ZANKER- Brand excludes any liability. If these regulations are not observed all given approvals of test institutes are void.
Before the first use Clean your ceramic hob carefully before its first use. Afterwards clean it regularly when it is just warm or cold. Avoid continued burning of food or dirt until it is solified. Ceramic hobs are treated and cleaned the same way as glass.
Cooking zones The cooking zones are indicated by markings on the ceramic top. The cooking zones are operated via the corresponding switch box or built-in oven and this is in the respective manuals. The dimensions of the cooking zones are such that they accommodate standard sized sauce pans.
Cooking equipment Specially tested cooking and frying pans for ceramic hobs exist. The following advice should be considered to achieve an optimal energy consumption as well as to avoid that overboiling food can be burnt onto the cooking zones. Cooking pans with aluminium or copper bottoms are unsuitable for use.
If there are remains of cleaning agents wipe them off before you turn on the heat again. Remains could corrode. ZANKER declines any liability should the applian- ce be used improperly and the safety measures not be observed!
230 V Frequency: 50 Hz Total Connected Load: 6.82 kW Rating Plates Prod-nr: 941 683 659 ZANKER Serie 6.82 kW 230 V ~ 50Hz T.Nr.: 420.449 Typ 201.1LETDDATHDAC ZSM 3118 KX What to do in case of a defect ?
Need help?
Do you have a question about the ZKM 3118 KX and is the answer not in the manual?
Questions and answers