Table of Contents
Advertisement
SET MENU
■ Input mode
B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 31 for details about the input mode).
Choices: AUTO, LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Note
Even if LAST is selected, the last setting for the EXTD SUR.
button will not be recalled.
■ Input rename
C)INPUT RENAME
Use this feature to change the name of the inputs in the
front panel display.
1
Press an input selector button to select the
input you want to change the name of.
2
Press AMP.
3
Press j / i to place the _ (under-bar) under
the space or the character you want to edit.
4
Press u / d to select the character you want,
then use j / i to move to the next space.
• You can use up to 8 characters for each input.
• Press d to change the character in the following
order, or press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space,
symbols (#, *, –, +, etc.).
5
Repeat steps 1 through 4 to rename each
input.
6
To exit, press SET MENU when finished.
62
3 DAB MENU
Use to adjust the DAB tuner parameters and ensemble/
service registry list.
■ Init scan
A)INIT SCAN
Use this feature to locate all the DAB broadcasts in your
area. The unit scans the entire band (or both bands, if
selected) and creates a registry list of every receivable
ensemble and service.
Choices: SCAN:FULL, SCAN:BAND3
■ Tune Aid
B)TUNE AID
Use this feature to determine the signal strength level of a
selected ensemble. This allows the user to discover the
best setup/placement for optimum DAB reception.
■ DRC mode
C)DRC MODE
Use this feature to compress the dynamic range of the
DAB broadcast, making softer sounds easier to hear. This
is especially useful when listening to a DAB service in a
noisy environment or at night.
Choices: DRC MODE: AUTO, DRC MODE: OFF
■ Prune list
D)PRUNE LIST
Use this feature to delete all of the inactive ensembles
from the DAB registry list.
■ Preset delete
E)PRESET DELETE
Use this feature to delete specific unnecessary services
from the DAB registry list.
Advertisement
Table of Contents
