Table of Contents
Advertisement
■ Remote control
Problem
Wrong distance or angle.
The remote control
does not work nor
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The remote control code was not correctly
set.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Cause
The remote control will function within a maximum
range of 6 m and no more than 30 degrees off-axis
from the front panel.
Reposition this unit.
Replace all batteries.
Set the remote control code correctly using "LIST OF
REMOTE CONTROL CODES" at the end of this
manual.
Try to set another code for the same remote control
using "LIST OF REMOTE CONTROL CODES" at
the end of this manual.
TROUBLESHOOTING
Remedy
Refer to
page
7
—
3
67
67
77
Advertisement
Table of Contents
