Table of Contents
Advertisement
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ BASIC SETUP
Use to quickly setup basic system parameters (see page 22).
■ MANUAL SETUP
Use to adjust speaker and system settings manually.
1 SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you perform "BASIC SETUP" (see page 22). You can
use SOUND MENU to make further adjustmen
Item
A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)CENTER GEQ
E)LFE LEVEL
F)D. RANGE
G)AUDIO SET
2 INPUT MENU
Use to reassign digital input/outputs and select the input mode.
Item
A)I/O ASSIGN
B)INPUT MODE
C)INPUT RENAME
3 DAB MENU
Use to adjust the DAB tuner parameters and ensemble/service registry list.
Item
This menu is the initial scan to receive each service in DAB.
A>INIT SCAN
This scan is necessary before the user can tune in to DAB services.
Check the signal strength of initial setting in DAB.
B>TUNE AID
C>DRC MENU
Use to enjoy strong sound such as at night, etc.
D>PRUNE LIST
Use to delete a group of inactive ensemble and services from the DAB registry list.
E>PRESET DEL
Use to delete specific unnecessary services from the DAB registry list.
SET MENU
ts.
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
Adjusts the output level of each speaker.
Adjusts the delay time of each speaker.
Adjusts the tonal quality of the center speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital or DTS signals.
Customizes the muting level, audio delay and tone bypass settings.
Assigns jacks according to the component to be used.
Selects the initial input mode of the source.
Changes the name of the inputs.
Features
Features
Features
SET MENU
Page
59
60
60
60
60
61
61
Page
61
62
62
Page
62
62
62
62
62
57
Advertisement
Table of Contents
