Yamaha AR210 Owner's/Operator's Manual page 91

CHOKE CABLE ADJUSTMENT
Pull the choke knob out until it stops.
Release the knob. The knob should not
move. If it moves back on its own, tight-
en the friction adjustment slightly. If the
knob is difficult to move, loosen the fric-
tion adjustment slightly.
REVERSE GATE MECHANISM
INSPECTION
1) Remove the engine stop switch lan-
yard and ignition keys.
2) Put the throttle levers in the idle
position (otherwise the shift lever
will not move).
3) Push the shift lever to Forward from
the Neutral position while a second
person observes shift gate move-
ment from outside the boat. Both
shift gates should lift completely to
the stops.
4) Pull the shift lever back from
Forward through
Reverse. The observer should
check for proper movement of the
M
If reverse gates do not operate smooth-
ly or correctly, ask your authorized
Yamaha Sport Boat dealer for service.
FUSE REPLACEMENT
The fuse is in the ignition coil holder. To
replace the fuse, unscrew the cap and
pull the two red leads out with the fuse
holder. Open the fuse holder and
replace the fuse.
➀
➁
Accessory Fuse
➀
➁
The fuse is on the accessory battery
lead wire (red with black stripe). Open
the fuse box and replace the fuse.
Neutral to
4-15
& C
AINTENANCE
shift gates. Both gates should drop
down over the nozzles to the stops.
Ignition coil holder
Cap
2
Fuse (20A)
Accessory lead
4
ARE
➂
Fuse (10A)
4 Fuse holder
1