Yamaha AR210 Owner's/Operator's Manual page 62

3
O
PERATION
Horn
Press the horn switch to be sure the
horn operates.
Engine Shut-Off Switch
➀
Engine shut-off switch
➁
Clip with cord
First, place the boat in the water to pro-
vide adequate engine cooling. Start the
engine, and then remove the engine
shut-off switch clip, and verify that the
engine stops.
Refer to pages 3-13 to 3-15, "START-
ING THE ENGINES," for information
on proper operation of the starter
switch.
Cooling-Water Pilot Outlets
Check that water comes out from the
pilot outlets while engine is running in
the water. Refer to page 2-10 for cor-
rect operation of the device.
A
B
C
D
NOTE: It may take up to 20 seconds
for water to reach the pilot outlets when
first launching the boat. The amount
3-18